Schifler’s Magnetic Drilling Machines and Tct Core Cutter Represent a Harmonious Blend of Precision Engineering and Powerful Performance.

  • AirMAB 5000

    POWERFUL DRILLING WITH COMPRESSED AIR

    Drilling with pneumatic drive and permanent magnet. Pneumatic Magnetic Drilling Machine equipped with Morse Taper 2 and KEYLESS quick change drill chuck.

    The motor of the AirMAB 5000 pneumatic magnetic drilling machine is approved according to EX class Ex II 2G T4 IIC D110 ° C. An ideal pneumatic drilling machine for oil & gas industry and for fire hazard situations.
    Rated Torque: 27 Nm
    Air consumption: 1000 l/min

    • High performance Atlas Copco vane motor
    • MT 2 Morse taper
    • KEYLESS quick-change drilling system
    • Powerful permanent magnet
    • Permanent internal lubrication
    • EX class Ex II 2G T4 IIC D110 ° C
    • Variable RPM from 290 to 575
    • Made in Germany



    Video

  • AutoCUT 500

    Fully Automatic Beveling

    AutoCUT 500 Automatic Plate Beveling Machine for Weld Preparation: Simple And Secure Handling With Guide Rails On Both Sides. Chamfer Width 30 mm. Made in Germany.

    Fast And Easy Preparation Of Weld Seams. Continuously Adjustable Angle (15° To 60°) & Land Width Up To 1-3/16″ On Plate Up To 1.5″ Thick. Robust Design, Single Operator Control, And Easy Handling.

    Automatic Feed On Plate Without The Need For A Cart Or Stand. Ideal For Use On Steel, Aluminum And Nonferrous Metals. Offers High-Quality Performance That Allows For Superior Weld Connections. Unit Propels Itself On The Plate – Both Forward And Backward – Without The Need For A Cart Or Stand.

    Plate Beveling With Automated and Continually Adjustable Speed Rate: Fast, Flexible And Variable Milling Angle Adjustment. The Guide Rails Make Handling The AutoCUT 500 Automatic Plate Beveling Machine Especially Simple And Secure.

    The Milling Angle Can Be Continuously Adjusted From 15 To 60 Degrees. Advantages Of The BDS AutoCUT 500 Automatic Beveling Machine. Easy, Safe Handling.

    No Restrictions Of The Working Length. Work Without Carriage, i.e., Independent Of Floor Conditions. Cutting Up To A Plate Thickness Of 40 mm.

    This BDS Machine Is Perfectly Suited For Straightforward And Quick Weld Preparation or Beveling Plates. The Automatic Plate Beveling Machine System Is Characterized By Easy Handling And Evenly Milled Sides For A Perfect Weld.

    The manual feed beveling machine is available as model number SKF 25



    Video

  • AutoMAB 350

    ECONOMICAL FULLY AUTOMATIC DRILLING SOLUTION

    The fully automatic magnetic drilling machine with automatic feed, automatic reverse, and automatic shut-off. The AutoMAB 350 is equipped with 19 mm (3/4″) Weldon direct arbour.

    The AutoMAB 350 automatic magnetic drill can drill 35 mm diameter holes in 55 mm cutting depth. AutoMAB 350 is easy to operate. Automatic drilling, automatic reverse, and automatic shut-off. The AutoMAB 350 automatic magnetic drill can also be operated manually. No need for adjusting speed gears makes the machine more simple. The advantages of AutoMAB 350 automatic magnetic drill are saving tool cost, the longer service life of the tool, a Single operator can simultaneously drill with multiple machines, etc. Made in Germany technology of automatic magnetic drilling machine.

    Tip: For a detailed product review video of AutoMAB 350 by an expert product reviewer from USA please

    • The control reliably monitors the drilling process, while the power consumption is displayed by means of an LED.
    • A safety cut-out protects the drilling motor from overload.
    • The high degree of uniformity in the drilling process protects the tool and machine and significantly reduces the risk of the core drill breaking.
    • Safety control cut-out: If the magnet loses its adhesion, the drilling and feed motors automatically cut out.
    • The automatic feed is activated by pushing back one of the three handles.
    • Ideal for drilling automatic as well as manually.
    • 19 mm direct Weldon arbor.
    • Made in Germany.



    Video

  • AutoMAB 450

    AFFORDABLE FULLY AUTOMATIC DRILLING SOLUTION WITH MT2

    The fully automatic magnetic drilling machine with automatic feed, automatic reverse and automatic shut-off. The AutoMAB 450 is equipped with Morse Taper 2 spindle taper. The AutoMAB 450 automatic magnetic drill machine can drill 45 mm diameter holes in 55 mm cutting depth.

    The AutoMAB 450 automatic magnetic drill machine is easy to use and simple magnetic drill machine. It’s also simple because there is no need for adjusting speed gears. The advantages of AutoMAB 450 automatic magnetic drill machine are that these machines are independent of the drilling skills of the operators, so even new operators can use the machines easily. Also, due to automatic feed one can get higher tools life i.e. higher performance of annular cutters. Made in Germany technology of automatic magnetic drilling machine.

    Tip: For a detailed product review video of AutoMAB 350 by an expert product reviewer from USA please CLICK HERE

    • The control reliably monitors the drilling process, while the power consumption is displayed through an LED.
    • A safety cut-out protects the drilling motor from overload.
    • The high degree of uniformity in the drilling process protects the tool and machine and significantly reduces the risk of the core drill breaking.
    • Safety control cut-out: If the magnet loses its adhesion, the drilling and feed motors automatically cut out.
    • The automatic feed is activated by pushing back one of the three handles.
    • Ideal for drilling automatic as well as manually.
    • Morse Taper 2 spindle.
    • Made in Germany.
  • Beveling Machines

    Milling head, Carbide inserts, Guide plates, etc. The new tangential plate configuration on the milling heads ensures low-impact and low-vibration machining even at lower speeds. A wide range of materials can be machined easily with the variable speed control & full wave control electronics in combination with the strong motor output. The new inserts with four cutting edges also make machining easier.

  • Carbide Series Annular Cutters

    Features

    BDS TCT annular cutters are produced on modern CNC-controlled grinding centers.This guarantees uniform cutting, quality and cutting performance of all BDS annular core cutters across the entire range. Annular cutters of this range are used preferably for machining hard materials and non-ferrous metals in combination with the BDS 6000 coolant or BDS cutting paste

    Advantages

    • Carbide-tipped core drills
    • Four different cutting depths: 30 mm, 55 mm, 75mm and 110 mm
    • Diameters of 12 mm to 150 mm



    Video

  • Carbide-F Quick-In Series Annular Cutters

    Features

    TCT annular cutters have become a successful range of tools worldwide. BDS provides for the rising demand by expanding its range. Carbide annular cutters with Quick in Shank are manufactured as standard with cutting depth of 30 mm, with diameters of 12 – 60 mm.

    Advantages

    • Tungsten Carbide Tip Core Drills
    • 35 mm cutting depth
    • Diameters in 12 mm to 60 mm
  • Carbide-F Quick-In Series Annular Cutters

    TCT annular cutters have become a successful range of tools worldwide. BDS provides for the rising demand by expanding its range. Carbide annular cutters with Quick in Shank are manufactured as standard with cutting depth of 30 mm, with diameters of 12 – 60 mm.

  • CarbidePLUS Series Annular Cutters

    Features

    Annular cutters of the Carbide PLUS range are coated with hard, wear-resistant material under the effect of plasma in another work step. Annular cutters of this range are used preferably for machining stainless steel and in combination with the BDS 6000 coolant or BDS cutting paste.

    Advantages

    • High-strength fully ground core drill
    • Carbide coating in a range of 2.5 μ
    • Longer service Life
    • More uniform discharge of chips, particularly during prolonged drilling – a key point for safety during work



    Video

  • CarbideRAIL Series Annular Cutters

    Features

    Carbide tip annular cutters have become a successful range of tools worldwide. BDS provides for the rising demand by expanding its range with a specially developed carbide cutter for rail drilling.

    Advantages

    • Carbide-tipped core drills
    • 30 mm cutting depth
    • Diameters from 16 mm to 36 mm
  • CarbideRAIL Series Annular Cutters

    Carbide tip annular cutters have become a successful range of tools worldwide. BDS provides for the rising demand by expanding its range with specially developed carbide cutter for rail drilling.

  • Clamping Devices

    For magnetic core drilling machines of the ProfiPLUS and ProfiSTART class. For tube processing and drilling of nonferrous metals and stainless steel. Build your own magnetic drilling machine! BDS provides new options for the subject of clamping mechanisms for working with commercially available manual drilling machines and for magnetic core drilling machines. The BDS clamping devices are also suitable for tubes with a diameter from 80 to 250 mm and 150 to 500 mm.

Main Menu

Need Help?