Schifler’s Magnetic Drilling Machines and Tct Core Cutter Represent a Harmonious Blend of Precision Engineering and Powerful Performance.
-
EKF 450.3
45° Chamfering
The EKF 450.3 Plate Chamfering Machine is designed to bevel 45° weld seams on steel, stainless, nonferrous metals, brass, and plastics.
Ideal for the following applications: Moldmaking, Boiler and process plant construction (prepare weld seams on heat exchangers), Mechanical engineering (deburr machine parts, chamfer edges to protect against paint peeling and create visible edges), Sheet metal (deburr cut edges).
This made in Germany plate chamfering machine is equipped with a strong 1500 Watt (13.6 Amp) motor that delivers 6000 RPM.
EKF 450.3 is equipped with a new generation milling head consisting of 3 triangular shaped carbide inserts which can be used from three sied.
This lightweight machine weighs just 4.6 kg. (10.5 lbs.)
-
EKF 452.3
2.5 mm Radius Chamfering
The EKF 452.3 Radius Chamfering Machine is a lightweight machine which weighs just 4.6 kg. (10.5 lbs.). This made in Germany chamfering machine is equipped with 1500 Watt (13.6 Amp) robust motor which has 6000 RPM. The EKF series machines are available in 230 Volts as well as in 110 Volts.
Due to its handy, compact design, the machine can be used on straight edges, internal and external radii and for drill holes from diameter 22 mm. The fine adjustment allows slight chamfers for deburring up to the preparation of welding seams.
Three milling cutters with a chamfering angle of 45°, optionally 30° or a radius of 2.5 mm are available. The EKF 452.3 is designed for chamfering 2.5 mm Radii.
-
EKF 530
30° X 12 mm Beveling
The new BDS Series of Portable Beveling Machines are tailor-made to meet the requirements of every operator. The new EKF 500 & 600 series from BDS is designed for maximum performance and optimal comfort. With the new milling head technology, the EKF Beveling Machines can also operate at low speeds without jerking or jumping. The result is optimally milled edges, even when rounding. The EKF 530 portable beveling machine is ideal for a 30-degree chamfer with 12 mm (0.472”) width. The EKF 530 is equipped with a new generation milling cutter with special carbide inserts. Made in Germany EKF 530 comes with an 1800 Watts (14.50 Amp) powerful motor delivering 1850 – 3350 RPM. The EKF 530 has variable speed control to fine tune the RPM you require. Weighing just 9.3 Kg. (20.5 lbs.) the EKF 530 is available in 220-240 V & 110-125 V (50-60 Hz).
-
EKF 545
45° X 12 mm Beveling
The EKF Portable Plate Beveller are ideal for deburring, bevelling and weld seam preparation.
They deliver optimal results in a short amount of time, be it machining metal components made of steel, stainless steel, non-ferrous metals, brass or even synthetic materials.
The new milling technology from BDS produces the best results with comfortable handling: The new tangential plate configuration on the milling heads ensures low-impact and low-vibration machining even at lower speeds.
EKF 545 plate beveller is ideal for 45-degree beveling with 12 mm (0.472”) width. Equipped with a German make motor which is 1800 Watts (14.50 Amp) and delivers 1850 – 3350 RPM.
The weight of the EKF 545 is 9.3 Kg. (20.5 lbs.) and is available in 230 and 110 Volts.
-
EKF 630
30° X 15 mm Beveling
The EKF 630 Heavy Duty Beveling Machine is an ideal machine for beveling 30-degree in 15 mm (0.590”) width. Equipped with a powerful German make motor of 2300 Watts (20.9 Amp) delivering 1600 – 3000 RPM with variable speed control.
EKF 630 weighs just 10.2 Kg (22.48 lbs.) and is available in 220-240 V & 110-125 V (50-60 Hz).
A wide range of materials can be machined easily with the variable speed control & full wave control electronics in combination with the strong motor output. The new inserts with four cutting edges also make machining easier.
A new gear mechanism redesigned especially for the new EKF Beveling Machine series delivers maximum stability: The double bearing in the working spindle angular ball bearings in tandem ensures precise concentricity and stability.
-
EKF 645
45° X 15 mm Beveling
The Made in Germany Portable Plate Beveling Machine For 45-Degree Chamfering and 15 mm (0.590”) Width. Provided with a robust motor of 2300 Watts (20.9 Amp) which delivers 1600 – 3000 RPM with variable speed control.
EKF 645 is available in 220-240 Volt and 110-125 Volt. EKF 645 weighs just 10.2 Kg (22.48 lbs.).
The rotary disc with recirculating bearings reduces friction resistance and energy consumption. New unique tangential plate configuration, No impact jarring when operating at low speeds, Clean milled edges, even in internal and external radii, Ideal for weld seam preparation.
-
High-performance lubrication spray 5200 /ZHS 400
For working in awkward positions (overhead and on a horizontal plane), also suitable for high-alloy materials. Foam-like spray with very high adhesive strength. Advantages: Precise dosing of lubrication spray and therefore optimum lubrication directly on the cutting edges. No dripping or splashing, thus ensuring maximum safety when working on ladders and scaffolds.
► White adhesive lubricant containing PTFE with corrosion protection
► Free from PCB, PCT, CFCs and chlorine
► Active substance: Mineral-based lithium grease with additives and solvents
► Compressed gas: Propane/butane, subject to labelling requirements
-
HSS Core Drills/ZHS 006 / ZHS 006
Purely vegetable oil that does not come under the category of hazardous goods in terms of customs & transport regulations. The raw materials used are not listed in the Catalogue of Substances Hazardous to Water. BDS 5000 is not subject to any labeling requirements.
-
HSS Standard Series Annular Cutters
Features
The standard core drill range for professional use. Fully ground core drill (annular cutters) made from high-performance high- speed steel on CNC-controlled grinding centres, with good discharge of chips. Drilling with minimal effort. For working on a horizontal plane, BDS recommends the BDS 5200 high-performance lubrication spray.
Advantages
- Tools with three different cutting depths: 30 mm, 55 mm and 110 mm
- Core drilling diameters of 12 mm to 130 mm
- Can be resharpened
The BDS basic program. The professional user will find the greatest possible program depth here. The BDS core drill series HSS-Standard has a long service life and heat resistance due to the use of high-performance steel. The tools of this all-round series are characterized by drilling without great effort.
-
HSS Vario-PLUS Series Annular Cutters
Features
Fully ground core drills made from high-performance high-speed steel with carbide coating. High economic efficiency due to longer service life, greater safety during work thanks to excellent discharge of chips, particularly for long core drills. BDS recommends the BDS 5000 high-performance cutting oil.
Advantages
- High-strength fully ground core drill
- Carbide coating in a range of 2.5 μ
- Longer service lives
- More uniform discharge of chips, particularly during prolonged drilling – a key point for safety during work
High-strength full-ground core drills, which are further processed under the influence of plasma with a hard material layer in the range of 2.5 μ. As a result, these tools achieve a significantly longer service life and more even chip removal, especially with long drills. An important point for occupational safety
-
HSS-Co 8 Series Annular Cutters
Features
The made in Germany annular cutters from this series have outstanding heat resistance and wear protection. In combination with speed-controlled BDS magnetic core drilling machines, these annular cutters are suitable for machining fine-grained steels and rustproof materials. BDS recommends the BDS 5000 Cutting Oil for machining stainless steel.
Advantages:
- High degree of heat resistance
- Better wear protection
- High cobalt content of 8%
- Suitable for higher loads in fine-grained steels and rustproof materials
- With 19 mm or 32 mm Weldon shank
- Can be resharpened
The goal of this latest BDS product development was a performance-optimized core drill series with higher heat resistance and better wear protection. An increased cobalt content in special steel brought the desired results. In conjunction with speed-controlled BDS magnetic core drilling machines, these core drills are suitable for higher loads in fine-grained steels and stainless materials. The core drills can be reground, they retain their positive product properties.
-
Industrial arbor with automatic internal lubrication
Tapershank For Core Drills MK 2 Weldon 19 mm MK 3 Weldon 19 mm MK 3 Weldon 32 mm MK 4 Weldon 32 mm The Industrial Arbor with automatic internal lubrication is a reliable and efficient tool designed for use with Core Drills. With its Tapershank and Weldon 19 mm or 32 mm options, it is perfect for metalworking projects that require precision and accuracy. The arbor’s automatic internal lubrication system ensures smooth and uninterrupted operation, making it a must-have for any industrial application. Available in MK 2, MK 3, and MK 4 options, this arbor is the perfect addition to your toolbox.