Rotabroach Magnetic Core Drill Machines Stand as Paragons of Precision and Efficiency in the World of Drilling Technology. These State-Of-The-Art Devices Redefine the Drilling Experience, Offering Unparalleled Accuracy and Speed.
-
AutoMAB 450
AFFORDABLE FULLY AUTOMATIC DRILLING SOLUTION WITH MT2
The fully automatic magnetic drilling machine with automatic feed, automatic reverse and automatic shut-off. The AutoMAB 450 is equipped with Morse Taper 2 spindle taper. The AutoMAB 450 automatic magnetic drill machine can drill 45 mm diameter holes in 55 mm cutting depth.
The AutoMAB 450 automatic magnetic drill machine is easy to use and simple magnetic drill machine. It’s also simple because there is no need for adjusting speed gears. The advantages of AutoMAB 450 automatic magnetic drill machine are that these machines are independent of the drilling skills of the operators, so even new operators can use the machines easily. Also, due to automatic feed one can get higher tools life i.e. higher performance of annular cutters. Made in Germany technology of automatic magnetic drilling machine.
Tip: For a detailed product review video of AutoMAB 350 by an expert product reviewer from USA please CLICK HERE
- The control reliably monitors the drilling process, while the power consumption is displayed through an LED.
- A safety cut-out protects the drilling motor from overload.
- The high degree of uniformity in the drilling process protects the tool and machine and significantly reduces the risk of the core drill breaking.
- Safety control cut-out: If the magnet loses its adhesion, the drilling and feed motors automatically cut out.
- The automatic feed is activated by pushing back one of the three handles.
- Ideal for drilling automatic as well as manually.
- Morse Taper 2 spindle.
- Made in Germany.
-
MAB 825 V / MAB 845 V
THE HEAVY-DUTY AUTOMATIC MAGNETIC DRILL
Full performance and flexibility for steel, plant, and machine construction. With adjustable automatic feed. An ideal machine for drilling with Twist Drills with Morse Taper 3 shanks. The premium made in Germany automatic magnetic drilling machine. Thanks to the reversible motor MAB 825V can also perform tapping (thread cutting).
The automatic feed is at the turnstile coupled in and out and can be switched on in any position. The infinitely variable feed speed ensures for optimal use of the respective tool. When the upper or lower end position is reached. The feed is automatically deactivated. Further processing is by manual switchover anytime possible. Safety control switch-off: If the magnet loses its grip, the drill and feed motor switch off automatically. The automatic magnetic drilling machine can also be used with manual feed.
- Variable automatic feed and automatic reverse
- Manual drilling option
- Variable speed & torque controls
- Available with Swivel Base options model number MAB 845V
- 4 Speed gear and Morse taper 3
- Reversible motor
- Carbon brush wear indicator & magnet indicator
- Delivered in heavy duty carry case on rolls
-
MAB 1300 V
THE STRONGEST OF THE STRONG
Superior performance thanks to the sophisticated display of power. The MAB 1300 V is currently the most powerful magnetic core drilling machine with controllable automatic feed. The worlds’ strongest automatic magnetic drilling machine, made in Germany. Ideal for drilling, tapping, reaming and countersink.
The automatic feed is at the turnstile coupled in and out and can be switched on in any position. The infinitely variable feed speed ensures for optimal use of the respective tool. When the upper or lower end position is reached. The feed is automatically deactivated. Further processing is by manual switchover anytime possible. Safety control switch-off: If the magnet loses its grip, the drill and feed motor switch off automatically. The automatic magnetic drilling machine can also be used with manual feed.
- Variable automatic feed and automatic reverse
- Manual drilling option
- Variable speed & torque controls
- Carbon brush wear indicator & magnet indicator
- Morse Taper 4
- 4 Speed gear
- Reversible motor
- Delivered in heavy duty carry case on rolls
-
MAB 155
THE SMALL MACHINE WITH HUGE POWER
Horizontal magnetic core drilling machine with an angular gearbox. Ideal for drilling in extremely confined spaces.
The MAB 155 horizontal magnetic drill machine is a handy and compact machine for drilling in confined spaces. It’s now equipped with a new powerful motor. The MAB 155 horizontal magnetic drilling machine is with ratchet for optimum handling.
- Extremely compact: only 180 mm (7 3/32”) tall
- Ratchet feed
- 1050 watt motor output
- Weight only 11 kg
- Brand new angular gearbox
- Safe switches
- Delivered in premium carry case
- Made in Germany
-
AirMAB 5000
POWERFUL DRILLING WITH COMPRESSED AIR
Drilling with pneumatic drive and permanent magnet. Pneumatic Magnetic Drilling Machine equipped with Morse Taper 2 and KEYLESS quick change drill chuck.
The motor of the AirMAB 5000 pneumatic magnetic drilling machine is approved according to EX class Ex II 2G T4 IIC D110 ° C. An ideal pneumatic drilling machine for oil & gas industry and for fire hazard situations.
Rated Torque: 27 Nm
Air consumption: 1000 l/min- High performance Atlas Copco vane motor
- MT 2 Morse taper
- KEYLESS quick-change drilling system
- Powerful permanent magnet
- Permanent internal lubrication
- EX class Ex II 2G T4 IIC D110 ° C
- Variable RPM from 290 to 575
- Made in Germany
-
RailMAB 915
THE SPECIALIST FOR RAILS
Developed for rail core drilling in signalling equipment and track construction of the RailMAB 915 rail drilling machine is a portable machine made in Germany.
The RailMAB 915 rail drilling machine is equipped with a powerful 1600 watts motor, oil-bath gearbox, and Morse Taper 3. This sophisticated rail drilling machine is an ideal machine for workshops and track manufacturing companies. The rail drilling machine can also be operated with electric generators. The RailMAB 915 rail drilling machine can be used for various Railway track profiles with rail shoe adapters.
- Powerful electric motor with 1600 watts
- 2-stage oil bath gearbox
- Also suitable for twist drilling 1-26 mm
- Powerful quick-change clamping system
- Variable speed & torque control
- Carbon brush indicator
- Lightweight, just 17 Kg.
- Made in Germany
-
RailMAB 965
LIGHTWEIGHT RAIL DRILL MACHINE
RDSO Approved Lightweight Rail Drill Machine. Just 21.5 Kg in weight and can be handled & operated by a single operator.
The lightweight rail drilling machine can be easily attached to the rails using a quick-release system. To ensure the necessary drilling stability, this exerts a pressure of 1.2 tons on the rail foot. This easy to use quick-change clamping system is very fast and can clamp & de-clamp within few seconds.
- 4 ccm cubic capacity
- 04 Nm torque
- Compact design
- Powerful quick-change clamping system
- Lightweight, just 21.5 Kg.
- Independent of electric power supply
- Powerful 1.5 kW (2HP) petrol engine
- Integrated petrol tank
-
AutoCUT 500
Fully Automatic Beveling
AutoCUT 500 Automatic Plate Beveling Machine for Weld Preparation: Simple And Secure Handling With Guide Rails On Both Sides. Chamfer Width 30 mm. Made in Germany.
Fast And Easy Preparation Of Weld Seams. Continuously Adjustable Angle (15° To 60°) & Land Width Up To 1-3/16″ On Plate Up To 1.5″ Thick. Robust Design, Single Operator Control, And Easy Handling.
Automatic Feed On Plate Without The Need For A Cart Or Stand. Ideal For Use On Steel, Aluminum And Nonferrous Metals. Offers High-Quality Performance That Allows For Superior Weld Connections. Unit Propels Itself On The Plate – Both Forward And Backward – Without The Need For A Cart Or Stand.
Plate Beveling With Automated and Continually Adjustable Speed Rate: Fast, Flexible And Variable Milling Angle Adjustment. The Guide Rails Make Handling The AutoCUT 500 Automatic Plate Beveling Machine Especially Simple And Secure.
The Milling Angle Can Be Continuously Adjusted From 15 To 60 Degrees. Advantages Of The BDS AutoCUT 500 Automatic Beveling Machine. Easy, Safe Handling.
No Restrictions Of The Working Length. Work Without Carriage, i.e., Independent Of Floor Conditions. Cutting Up To A Plate Thickness Of 40 mm.
This BDS Machine Is Perfectly Suited For Straightforward And Quick Weld Preparation or Beveling Plates. The Automatic Plate Beveling Machine System Is Characterized By Easy Handling And Evenly Milled Sides For A Perfect Weld.
The manual feed beveling machine is available as model number SKF 25
-
SKF 25
The SKF 25 Portable Beveling Machine also called as Manual Beveling Machine Delivers Wide Chamfers Up To 15 mm, Continuous Angle Adjustment From 15 To 60 Degree. The SKF 25 Beveling Machine Has Ergonomic Handle Arrangement, Easily Guided With Guide Rollers.
Good Work Preparation, Good Results – This Universal Plate Beveling Machine With Integrated Tube Enables Perfect Weld Preparation.Large Guide Rollers And A Continuous Angle Adjustment From 15 To 60° Render The System Practical.The New Hand-Guided BDS Machine Is Ideally Suited For Easy And Quick Preparation Of Welded Seams. On Account Of Its Low Weight Of 22 Kg, It Is Easy To Handle And Can Be Guided Exactly And Easily With Smooth-Running Rollers. The End Result Is Uniformly Milled Edges For Perfect Welded Seams.
The SKF 25 Beveling Machine Bevels 15° To 60° Angles On Plate Or Pipe With A Continuously Adjustable Angle And Land Width Up To 3/4″. Ideal For Use On Steel, Stainless Steel, Aluminum And Nonferrous Metals.
Offers High-Quality Performance That Allows For Superior Weld Connections. Robust Design, Single Operator Control And Easy Handling; Designed For Continuous Operation With Smooth Roller Guides.The SKF 25 Beveling Machine’s Anti-Vibration System Protects Electronics And Allows For More Comfortable Operation. Includes One Milling Head And 10 Indexable Inserts For Fast Metal Removal And Extended Tool Life.
Work On Welding Angles And Weld Preparation On Pipes/Tubes With A Minimum OD Of 6-1/4″ (160mm) With Built-In Pipe Roller Guide; Ideal For Beveling Pipe 6-1/4″ OD And Larger. Precise Roller Guidance, Low Friction Resistance. Single-Operator, Straightforward Handling.
The automatic feed beveling machine is available as model number AutoCUT 500 -
EKF 300.3
30° Chamfering (1/4″)
EKF 300.3 Chamfering Machine with fine adjustment feature for slight chamfers when deburring for the preparation of weld seams.
The EKF 300.3 is ideal for chamfering 30-degree angle in 5 mm (1/4″) width. Ideal for straight edges, from the outside edge of the profile as well as the inside edges.
Equipped with a robust milling cutter the EKF 300.3 has 3 pieces of carbide inserts in a triangular shape which can be used from 3 sides.
Made in Germany EKF 300.3 is equipped with a powerful 1500 Watt (13.6 Amp) motor which delivers 6000 RPM.
This compact EKF 300.3 chamfering machines weighs just 4.6 Kg (10.5 lbs) -
EKF 450.3
45° Chamfering
The EKF 450.3 Plate Chamfering Machine is designed to bevel 45° weld seams on steel, stainless, nonferrous metals, brass, and plastics.
Ideal for the following applications: Moldmaking, Boiler and process plant construction (prepare weld seams on heat exchangers), Mechanical engineering (deburr machine parts, chamfer edges to protect against paint peeling and create visible edges), Sheet metal (deburr cut edges).
This made in Germany plate chamfering machine is equipped with a strong 1500 Watt (13.6 Amp) motor that delivers 6000 RPM.
EKF 450.3 is equipped with a new generation milling head consisting of 3 triangular shaped carbide inserts which can be used from three sied.
This lightweight machine weighs just 4.6 kg. (10.5 lbs.)
-
EKF 452.3
2.5 mm Radius Chamfering
The EKF 452.3 Radius Chamfering Machine is a lightweight machine which weighs just 4.6 kg. (10.5 lbs.). This made in Germany chamfering machine is equipped with 1500 Watt (13.6 Amp) robust motor which has 6000 RPM. The EKF series machines are available in 230 Volts as well as in 110 Volts.
Due to its handy, compact design, the machine can be used on straight edges, internal and external radii and for drill holes from diameter 22 mm. The fine adjustment allows slight chamfers for deburring up to the preparation of welding seams.
Three milling cutters with a chamfering angle of 45°, optionally 30° or a radius of 2.5 mm are available. The EKF 452.3 is designed for chamfering 2.5 mm Radii.