Schifler’s Magnetic Drilling Machines and Tct Core Cutter Represent a Harmonious Blend of Precision Engineering and Powerful Performance.
-
Element-40
- The ‘Element 40’ has a powerful, two speed mechanical gearbox.
- Small in size but this machine revels in the harshest of environments.
- Suitable for drilling up to 40mm diameter by 50mm depth.
Specifications
Model Number Element 40/1 / Element 40/3 Motor Specification 110V 1200W / 230V 1200W No Load RPM Low Gear: 300 RPM
High Gear: 600 RPMMax Hole Cutting Capacity ø40 x 50mm deep Drill Chuck Capacity ø13mm Overall Dimensions Height: 510mm / Width: 185mm with Capstan / Length: 285mm with Guard Machine Weight 13.65kg Magnetic Adhesion 10,000N Magnetic Adhesion 10,000N Magnet Size 180mm x 90mm Safety Features Cutsmart™ Technology / Fixed Guard / Magnetic Detection / Mechanical Clutch -
Element-50
- The ‘Element 50’ is one of Rotabroach’s most versatile machines.
- Small in size, with reversible features to allow tapping.
- Suitable for drilling up to 50mm diameter by 50mm depth.
- Dual motor protection system prolonging the machines life.
Specifications
Model Number Element 50/1 / Element 50/3 Motor Specification 110V 1500W / 230V 1500W No Load RPM Low Gear: 100-265 RPM
High Gear: 200-500 RPMMax Hole Cutting Capacity ø50 x 50mm Deep – 23mm with MT Shank Drill Overall Dimensions Height: 460mm / Width: 195mm with Capstan / Length: 400mm with Guard Machine Weight 15.8kg Magnetic Adhesion 13,500N Magnet Size 200mm x 98mm Safety Features Cutsmart™ Technology / Fixed Guard / Magnetic Detection / Mechanical Clutch -
Gator
- Used in applications when only hydraulic supplies are most convenient or necessary.
- Suitable for drilling up to 52mm diameter by 50mm depth.
Specifications
Model Number RD140 Motor Specification 140 bar (2050 psi) No Load RPM 630 RPM Max Hole Cutting Capacity ø52 x 50mm deep Drill Chuck Capacity ø16mm Overall Dimensions Height: 520mm / Width: 160mm with Capstan / Length: 320mm with Guard Machine Weight 23kg Magnetic Adhesion 7,000N Magnet Size 175mm x 75mm Safety Features Fixed Guard -
High-performance lubrication spray 5200 /ZHS 400
For working in awkward positions (overhead and on a horizontal plane), also suitable for high-alloy materials. Foam-like spray with very high adhesive strength. Advantages: Precise dosing of lubrication spray and therefore optimum lubrication directly on the cutting edges. No dripping or splashing, thus ensuring maximum safety when working on ladders and scaffolds.
► White adhesive lubricant containing PTFE with corrosion protection
► Free from PCB, PCT, CFCs and chlorine
► Active substance: Mineral-based lithium grease with additives and solvents
► Compressed gas: Propane/butane, subject to labelling requirements
-
HSS Core Drills/ZHS 006 / ZHS 006
Purely vegetable oil that does not come under the category of hazardous goods in terms of customs & transport regulations. The raw materials used are not listed in the Catalogue of Substances Hazardous to Water. BDS 5000 is not subject to any labeling requirements.
-
HSS Standard Series Annular Cutters
Features
The standard core drill range for professional use. Fully ground core drill (annular cutters) made from high-performance high- speed steel on CNC-controlled grinding centres, with good discharge of chips. Drilling with minimal effort. For working on a horizontal plane, BDS recommends the BDS 5200 high-performance lubrication spray.
Advantages
- Tools with three different cutting depths: 30 mm, 55 mm and 110 mm
- Core drilling diameters of 12 mm to 130 mm
- Can be resharpened
The BDS basic program. The professional user will find the greatest possible program depth here. The BDS core drill series HSS-Standard has a long service life and heat resistance due to the use of high-performance steel. The tools of this all-round series are characterized by drilling without great effort.
-
HSS Vario-PLUS Series Annular Cutters
Features
Fully ground core drills made from high-performance high-speed steel with carbide coating. High economic efficiency due to longer service life, greater safety during work thanks to excellent discharge of chips, particularly for long core drills. BDS recommends the BDS 5000 high-performance cutting oil.
Advantages
- High-strength fully ground core drill
- Carbide coating in a range of 2.5 μ
- Longer service lives
- More uniform discharge of chips, particularly during prolonged drilling – a key point for safety during work
High-strength full-ground core drills, which are further processed under the influence of plasma with a hard material layer in the range of 2.5 μ. As a result, these tools achieve a significantly longer service life and more even chip removal, especially with long drills. An important point for occupational safety
-
HSS-Co 8 Series Annular Cutters
Features
The made in Germany annular cutters from this series have outstanding heat resistance and wear protection. In combination with speed-controlled BDS magnetic core drilling machines, these annular cutters are suitable for machining fine-grained steels and rustproof materials. BDS recommends the BDS 5000 Cutting Oil for machining stainless steel.
Advantages:
- High degree of heat resistance
- Better wear protection
- High cobalt content of 8%
- Suitable for higher loads in fine-grained steels and rustproof materials
- With 19 mm or 32 mm Weldon shank
- Can be resharpened
The goal of this latest BDS product development was a performance-optimized core drill series with higher heat resistance and better wear protection. An increased cobalt content in special steel brought the desired results. In conjunction with speed-controlled BDS magnetic core drilling machines, these core drills are suitable for higher loads in fine-grained steels and stainless materials. The core drills can be reground, they retain their positive product properties.
-
Industrial arbor with automatic internal lubrication
Tapershank For Core Drills MK 2 Weldon 19 mm MK 3 Weldon 19 mm MK 3 Weldon 32 mm MK 4 Weldon 32 mm The Industrial Arbor with automatic internal lubrication is a reliable and efficient tool designed for use with Core Drills. With its Tapershank and Weldon 19 mm or 32 mm options, it is perfect for metalworking projects that require precision and accuracy. The arbor’s automatic internal lubrication system ensures smooth and uninterrupted operation, making it a must-have for any industrial application. Available in MK 2, MK 3, and MK 4 options, this arbor is the perfect addition to your toolbox.
-
MAB 100 K
THE LIGHTWEIGHT HEAVY PERFORMER
Compact, handy, powerful. The right magnetic core drilling machine, when low weight is the priority.
At just 9.9 kg, the MAB 100 K magnetic drilling machine is lightweight in the BDS range. Easy to handle and with a low overall height. The internal wiring ensures a high degree of safety during work. Equipped with KEYLESS quick-change drilling system.
- KEYLESS quick-change drill chuck
- Magnet indicator
- Permanent internal lubrication
- Internal cabling
- Just 9.9 Kg. (21.82 lbs.)
- Powerful 1050 Watt motor
- Robust electromagnet
- Heavy duty magnetic drill
-
MAB 1300
THE STRONGEST OF THE STRONG
Superior performance with exceptional power delivery. Equipped with Servo Assist Power Feed, which works like a power steering of a car, making the drilling effortless.
Pure power! 2,300 W motor power, four speeds, and a full package of features leave nothing to be desired. The MAB 1300 magnetic drilling machine goes to the limit of magnetic core drill technology
- Servo Assist Power Feed
- Overheating protection
- Speed & torque control
- Reversible motor
- Magnet indicator
- Full wave control electronics
- Safety friction clutch
- Heavy duty carry case with rollers
Core Drilling 130 mm
Thread Cutting M 42
Powerful Motor 2300 Watt
Weight 51 Kg
-
MAB 1300 V
THE STRONGEST OF THE STRONG
Superior performance thanks to the sophisticated display of power. The MAB 1300 V is currently the most powerful magnetic core drilling machine with controllable automatic feed. The worlds’ strongest automatic magnetic drilling machine, made in Germany. Ideal for drilling, tapping, reaming and countersink.
The automatic feed is at the turnstile coupled in and out and can be switched on in any position. The infinitely variable feed speed ensures for optimal use of the respective tool. When the upper or lower end position is reached. The feed is automatically deactivated. Further processing is by manual switchover anytime possible. Safety control switch-off: If the magnet loses its grip, the drill and feed motor switch off automatically. The automatic magnetic drilling machine can also be used with manual feed.
- Variable automatic feed and automatic reverse
- Manual drilling option
- Variable speed & torque controls
- Carbon brush wear indicator & magnet indicator
- Morse Taper 4
- 4 Speed gear
- Reversible motor
- Delivered in heavy duty carry case on rolls