Schifler’s Magnetic Drilling Machines and Tct Core Cutter Represent a Harmonious Blend of Precision Engineering and Powerful Performance.

  • Magnetic Drilling Machine SWC 50 WT

    Technical Specifications

    Motor power 1150 watt
    Spindle MT3, 19 mm Weldon
    Broach cutter (35 mm length) Ø 12 mm – Ø 50 mm
    Broach cutter (50 mm length) Ø 12 mm – Ø 50 mm
    Broach cutter (80 mm length) Ø 18 mm – Ø 26 mm
    Tapping Ø 20 mm
    Twist Drill Ø 23 mm
    RPM 250 min-1/450 min-1
    Flexible Stroke Upto 205 mm
    Weight 16kg (59.5 lbs)
    Magnet power 15000 N
    Input supply voltage 220 V



    Video

  • Magnetic Drilling Machine SWC 50PDT

    Technical Specifications

    Motor power 1150 watt
    Spindle MT3, 19 mm Weldon
    Broach cutter (35 mm length) Ø 12 mm – Ø 50 mm
    Broach cutter (50 mm length) Ø 12 mm – Ø 50 mm
    Broach cutter (80 mm length) Ø 18 mm – Ø 26 mm
    Tapping M6-M20
    Twist drill Ø23 mm
    RPM 250 min-1/450 min-1
    Stroke Flexible Stroke upto 205 mm
    Smallest Pipe Diameter 80 mm (3.3/16”)
    Weight 16 kg (59.5 lbs)
    Magnet power 15000 N.
    Input supply voltage 220 V



    Video

  • Pilot Pin

    Adaptors

    Pilot Pin 6×35
    Pilot Pin 6×50
    Pilot Pin 8×35
    Pilot Pin 8×50
    Pilot Pin 8×80
    Pilot Pin 8×100
    Pilot Pin 8×150 Split Pin
    Pilot Pin 8×157 Split Pin
    Pilot Pin 8×168 Split Pin

  • PipeMAB 200

    STRONG GRIP ON PIPES & CURVED SURFACES

    Pipe Drilling Machine With Special Magnetic System

    Powerful magnetic adhesion force up to max. 1020kg (20 mm material thickness / S 275 JR). The new PipeMAB magnetic core drilling machines from BDS Maschinen, Made in Germany. The patented pipe magnetic clamping system with two permanent magnets automatically adapts to the pipe diameter. The swivel arrangement of the permanent magnets allows pivoting to conform to any pipe 85 mm (3″) diameter or larger, on straight surfaces as well as inside and outside of the curve surfaces.
    Result: Fast, accurate and safe drilling with the BDS PipeMAB series.

    • Ideal for drilling on curved & flat surfaces
    • Patented shallow-field magnetic technology
    • Permanent magnet, independent of electricity
    • Suitable for pipes 85 mm (3”) or larger
    • Made in Germany lightweight and compact machine
    • Strong grip for material as thin as 3 mm (9/64″)
    • Elongated tool holder for maximum utilization of the machines’ stroke
  • PipeMAB 525

    STRONG GRIP ON PIPES & CURVED SURFACES

    Pipe Drilling + Tapping Machine With Special Magnetic System

    Powerful magnetic adhesion force up to max. 1020kg (20 mm material thickness / S 275 JR). The new PipeMAB magnetic core drilling machines from BDS Maschinen are made in Germany. The patented pipe magnetic clamping system with two permanent magnets automatically adapts to the pipe diameter. The swivel arrangement of the permanent magnets allows pivoting to conform to any pipe 85 mm (3″) diameter or larger, on straight surfaces as well as inside and outside of the curve surfaces. Result: Fast, accurate, and safe drilling with the BDS PipeMAB 252 series.

    • Ideal for drilling+tapping on curved & flat surfaces
    • Reversible motor with variable speed & torque controls
    • Patented shallow-field magnetic technology
    • Suitable for pipes 75 mm (3”) or larger
    • Made in Germany lightweight and compact machine
    • Strong grip for material as thin as 3 mm (9/64″)
    • Elongated tool holder for maximum utilization of the machines’ stroke
  • RailMAB 915

    THE SPECIALIST FOR RAILS

    Developed for rail core drilling in signalling equipment and track construction of the RailMAB 915 rail drilling machine is a portable machine made in Germany.

    The RailMAB 915 rail drilling machine is equipped with a powerful 1600 watts motor, oil-bath gearbox, and Morse Taper 3. This sophisticated rail drilling machine is an ideal machine for workshops and track manufacturing companies. The rail drilling machine can also be operated with electric generators. The RailMAB 915 rail drilling machine can be used for various Railway track profiles with rail shoe adapters.

    • Powerful electric motor with 1600 watts
    • 2-stage oil bath gearbox
    • Also suitable for twist drilling 1-26 mm
    • Powerful quick-change clamping system
    • Variable speed & torque control
    • Carbon brush indicator
    • Lightweight, just 17 Kg.
    • Made in Germany
  • RailMAB 965

    LIGHTWEIGHT RAIL DRILL MACHINE

    RDSO Approved Lightweight Rail Drill Machine. Just 21.5 Kg in weight and can be handled & operated by a single operator.

    The lightweight rail drilling machine can be easily attached to the rails using a quick-release system. To ensure the necessary drilling stability, this exerts a pressure of 1.2 tons on the rail foot. This easy to use quick-change clamping system is very fast and can clamp & de-clamp within few seconds.

    • 4 ccm cubic capacity
    • 04 Nm torque
    • Compact design
    • Powerful quick-change clamping system
    • Lightweight, just 21.5 Kg.
    • Independent of electric power supply
    • Powerful 1.5 kW (2HP) petrol engine
    • Integrated petrol tank
  • Series Quick-In HSS-Co 8-F Annular Cutters

    Features

    Ideal for quick-in recording system. 18 mm shaft for the quick-in mounting system. 35 mm cutting depth. The made in Germany annular cutters from this series have outstanding heat resistance and wear protection. In combination with speed-controlled BDS magnetic core drilling machines, these annular cutters are suitable for machining fine-grained steels and rustproof materials. BDS recommends the BDS 5000 Cutting Oil for machining stainless steel.

    Advanced

    • High degree of heat resistance
    • Better wear protection
    • High cobalt content of 8%
    • Suitable for higher loads in fine-grained steels and rustproof materials
    • With 19 mm or 32 mm Weldon shank
    • Can be resharpened

    The goal of this latest BDS product development was a performance-optimized core drill series with higher heat resistance and better wear protection. An increased cobalt content in special steel brought the desired results. In conjunction with speed-controlled BDS magnetic core drilling machines, these core drills are suitable for higher loads in fine-grained steels and stainless materials. The core drills can be reground, they retain their positive product properties.

  • Series Quick-In HSS-Co 8-F Annular Cutters

    Ideal for quick-in recording system. 18 mm shaft for quick-in mounting system. 35 mm cutting depth. The made in Germany annular cutters from this series have outstanding heat resistance and wear protection. In combination with speed-controlled BDS magnetic core drilling machines, these annular cutters are suitable for machining fine-grained steels and rustproof materials. BDS recommends the BDS 5000 Cutting Oil for machining stainless steel

  • Shank Adaptor

    Adaptors

    Adaptor 19 to 32mm
    Adaptor 32 to 19mm

  • Shank Adaptors

    DescriptionFor Core DrillsAdapter / Weldon 19 mm (3/4″) AdapterFeinAdapter / Weldon 19 mm (3/4″) AdapterUniversal

  • SKF 25

    The SKF 25 Portable Beveling Machine also called as Manual Beveling Machine Delivers Wide Chamfers Up To 15 mm, Continuous Angle Adjustment From 15 To 60 Degree. The SKF 25 Beveling Machine Has Ergonomic Handle Arrangement, Easily Guided With Guide Rollers.
    Good Work Preparation, Good Results – This Universal Plate Beveling Machine With Integrated Tube Enables Perfect Weld Preparation.

    Large Guide Rollers And A Continuous Angle Adjustment From 15 To 60° Render The System Practical.The New Hand-Guided BDS Machine Is Ideally Suited For Easy And Quick Preparation Of Welded Seams. On Account Of Its Low Weight Of 22 Kg, It Is Easy To Handle And Can Be Guided Exactly And Easily With Smooth-Running Rollers. The End Result Is Uniformly Milled Edges For Perfect Welded Seams.
    The SKF 25 Beveling Machine Bevels 15° To 60° Angles On Plate Or Pipe With A Continuously Adjustable Angle And Land Width Up To 3/4″. Ideal For Use On Steel, Stainless Steel, Aluminum And Nonferrous Metals.
    Offers High-Quality Performance That Allows For Superior Weld Connections. Robust Design, Single Operator Control And Easy Handling; Designed For Continuous Operation With Smooth Roller Guides.

    The SKF 25 Beveling Machine’s Anti-Vibration System Protects Electronics And Allows For More Comfortable Operation. Includes One Milling Head And 10 Indexable Inserts For Fast Metal Removal And Extended Tool Life.
    Work On Welding Angles And Weld Preparation On Pipes/Tubes With A Minimum OD Of 6-1/4″ (160mm) With Built-In Pipe Roller Guide; Ideal For Beveling Pipe 6-1/4″ OD And Larger. Precise Roller Guidance, Low Friction Resistance. Single-Operator, Straightforward Handling.
    The automatic feed beveling machine is available as model number AutoCUT 500



    Video

Main Menu

Need Help?