Unika Stands Out as a Reliable Partner for Industries Seeking Precision, Efficiency, and Sustainability. from Construction Sites to Mining Operations, the Versatility and Performance of Unika Core Drills Make Them an Invaluable Asset.

  • RailMAB 965

    LIGHTWEIGHT RAIL DRILL MACHINE

    RDSO Approved Lightweight Rail Drill Machine. Just 21.5 Kg in weight and can be handled & operated by a single operator.

    The lightweight rail drilling machine can be easily attached to the rails using a quick-release system. To ensure the necessary drilling stability, this exerts a pressure of 1.2 tons on the rail foot. This easy to use quick-change clamping system is very fast and can clamp & de-clamp within few seconds.

    • 4 ccm cubic capacity
    • 04 Nm torque
    • Compact design
    • Powerful quick-change clamping system
    • Lightweight, just 21.5 Kg.
    • Independent of electric power supply
    • Powerful 1.5 kW (2HP) petrol engine
    • Integrated petrol tank
  • Rooty anchor C Type Pin

    • Simply hammer in the pin. Just by looking at the pin, completion of anchor can be confirmed.
    • As the thread and the anchor main body are the same in diameter, anchoring without rattling is possible by drilling from above fixture.
  • Series Quick-In HSS-Co 8-F Annular Cutters

    Features

    Ideal for quick-in recording system. 18 mm shaft for the quick-in mounting system. 35 mm cutting depth. The made in Germany annular cutters from this series have outstanding heat resistance and wear protection. In combination with speed-controlled BDS magnetic core drilling machines, these annular cutters are suitable for machining fine-grained steels and rustproof materials. BDS recommends the BDS 5000 Cutting Oil for machining stainless steel.

    Advanced

    • High degree of heat resistance
    • Better wear protection
    • High cobalt content of 8%
    • Suitable for higher loads in fine-grained steels and rustproof materials
    • With 19 mm or 32 mm Weldon shank
    • Can be resharpened

    The goal of this latest BDS product development was a performance-optimized core drill series with higher heat resistance and better wear protection. An increased cobalt content in special steel brought the desired results. In conjunction with speed-controlled BDS magnetic core drilling machines, these core drills are suitable for higher loads in fine-grained steels and stainless materials. The core drills can be reground, they retain their positive product properties.

  • Series Quick-In HSS-Co 8-F Annular Cutters

    Ideal for quick-in recording system. 18 mm shaft for quick-in mounting system. 35 mm cutting depth. The made in Germany annular cutters from this series have outstanding heat resistance and wear protection. In combination with speed-controlled BDS magnetic core drilling machines, these annular cutters are suitable for machining fine-grained steels and rustproof materials. BDS recommends the BDS 5000 Cutting Oil for machining stainless steel

  • Shaving Collection System QBit UX SDS Shank

    • With the aid of a high-efficiency vacuum collecting system with low drag, almost all of the generated dust and shavings can be vacuum extracted.
    • With the aid of newly designed holes and cross-shaped tips, vacuum extraction has become more efficient.
    • Adopting the new Q adapter with a spring enables it to be detached easily.
  • Single-function core drill bit E&S ALC Type

     Single Function Core Drill E&S
    • Compatible with ALC features. Large-bore drilling realized for hard-to-drill materials of ALC panels.
    • Outstanding rotational force enables easy cutting of ALC panels including piano wires and double reinforcement.
    • Sharp drilling force is provided for the ultra-hard tips of cutting edges. Adopts high-toughness materials that excel in wear resistance.
    • SDS shanks are also available at the same price.
  • Single-function core drill bit E&S DC Type

    • Capable of drilling reinforced concrete (cutting up to triple-reinforcement) by dry process without using water.
    • Center pin positions only to reduce vibration and noise.
    • Uses “10 mm/13 mm chuck combination shank(PAT.P)” allowing most drill chucks.
    • SDS shanks are also available at the same price.
  • Single-function core drill bit E&S Multi-type

    • Multi-purpose in drilling in siding board walls, plasterboard, FRP, veneer panels, PVC panels, and compound materials etc.
    • Pocket shape in consideration of swarf discharge efficiency also facilitates smooth drilling in thick panels and deep holes.
    • SDS shanks are also available at the same price.
  • Single-function core drill bit E&S RC Type

    • Adopts a sharp cutting-edge shape which enables speedy drilling only by rotation.
    • Simultaneous pursuit of accuracy and efficiency. Sure and steady drilling is enabled even for fragile work materials.
    • Uses “10 mm/13 mm chuck combination shank(PAT.P)” allowing most drill chucks.
    • SDS shanks are also available at the same price.
  • Single-function core drill bit E&S VC Type

    Single-function core drill bit E&S VC
    • Applying vibration and rotation to the cutting edge enables speedier drilling by crushing the work material while drilling.
    • A wide lineup of diameter sizes of 22 mm to 220 mm.
    • Uses “10 mm/13 mm chuck combination shank” allowing most drill chucks.
    • SDS shanks are also available at the same price.
  • SKF 25

    The SKF 25 Portable Beveling Machine also called as Manual Beveling Machine Delivers Wide Chamfers Up To 15 mm, Continuous Angle Adjustment From 15 To 60 Degree. The SKF 25 Beveling Machine Has Ergonomic Handle Arrangement, Easily Guided With Guide Rollers.
    Good Work Preparation, Good Results – This Universal Plate Beveling Machine With Integrated Tube Enables Perfect Weld Preparation.

    Large Guide Rollers And A Continuous Angle Adjustment From 15 To 60° Render The System Practical.The New Hand-Guided BDS Machine Is Ideally Suited For Easy And Quick Preparation Of Welded Seams. On Account Of Its Low Weight Of 22 Kg, It Is Easy To Handle And Can Be Guided Exactly And Easily With Smooth-Running Rollers. The End Result Is Uniformly Milled Edges For Perfect Welded Seams.
    The SKF 25 Beveling Machine Bevels 15° To 60° Angles On Plate Or Pipe With A Continuously Adjustable Angle And Land Width Up To 3/4″. Ideal For Use On Steel, Stainless Steel, Aluminum And Nonferrous Metals.
    Offers High-Quality Performance That Allows For Superior Weld Connections. Robust Design, Single Operator Control And Easy Handling; Designed For Continuous Operation With Smooth Roller Guides.

    The SKF 25 Beveling Machine’s Anti-Vibration System Protects Electronics And Allows For More Comfortable Operation. Includes One Milling Head And 10 Indexable Inserts For Fast Metal Removal And Extended Tool Life.
    Work On Welding Angles And Weld Preparation On Pipes/Tubes With A Minimum OD Of 6-1/4″ (160mm) With Built-In Pipe Roller Guide; Ideal For Beveling Pipe 6-1/4″ OD And Larger. Precise Roller Guidance, Low Friction Resistance. Single-Operator, Straightforward Handling.
    The automatic feed beveling machine is available as model number AutoCUT 500



    Video

  • T.C.T. hole saw Cordless Meta-core

    • A first in Japan! T.C.T. hole saw for use with rechargeable and small electric drills (under 400W). Enables drilling of stainless steel with low power.
    • Cutting resistance cutting edges and center drills comprehensively reduced. Allow 3 times the number of hole drilling with a full charge (compared with standard Meta-core).

Main Menu

Need Help?